36CH DMX512 RGBW LED DIGITAL DISPLAY DECODER

AED420.00
Tax included
DMX512-36CH
Quantity
Add to wishlist

  Secure payment

By Mamo Pay

  Free Shipping

On orders above AED 200

  Estimated Delivery

Dispatched within 24 hours

Guaranteed safe & secure checkout

       PRODUCT SPECIFICATIONS:

         36CH DMX512 RGBW LED DIGITAL DISPLAY DECODER

         

         36CH-DMX512 CONSTANT DECODER OPERATION INSTRUCTION:

  • This technology changes the international fashion DMX512/1990 standard digital control signals into analog control signals. There are 1 ~ 36 output channels, each channel can achieve 256 control levels.
  • This constant decoder is used when DMX512 control equipment control general LED lighting.
  • The decoder adopts the 4 numbers digital tube to show the address code, and with 3 buttons to setting, make it easier to use.

 

         Product Performance:

  • Input Power: DC9V~DC24V
  • Maximum load current: 2A/CHx36CH
  • Maximum power load: 12V: <864W 24V: <1728W
  • Output gray level: 256.
  • Input Signal: DMX512/1990
  • Output signal: 36 channels Constant PWM
  • Standard XLR-3 caron plug, terminal.
  • Size: L219*W88*H38mm
  • Net Weight: 619g
  • Gross Weight: g: 738g

 

         BASIC OPERATIONS:

  • 36 DMX output channels can connect with single or RGB, RGBW strips.
  • 0-100% dimming output, each channel 256 gray levels
  • The decoder comes with 14 built-in effects, 10 levels for speed changing of dynamic modes.
  • International standard DMX512 input protocol, adopt the digital tube to show the address code, and with 3 buttons to setting, make it easier to use.
  • Input voltage: DC9~24V. Output power: 12V: <864W, 24V: <1728W.

 

          DECODER BUIT-IN MODE FUNCTION:

           With 14 built-in mode functions, including:

  •  Static red/green/blue/yellow/ purple/cyan/white
  •  Scan/scan back and forth/flash/3 color jump or fade/7 color jump or fade (these 7 dynamic modes have 10 levels of speed adjustable)

 

         Installation Notes: 

           Input voltage in DC 12/24V are suitable, you need to check if the output power is enough for your light strips need:

  • 12V then output power <864W (2A/channel*36channel*12V=864W)
  • 24V then output power <1728W (2A/channel*36channel*24V=1728W)

 

•• This kind of controller works only under DC 9V-24V, which is provided by the matched controllable main power, or else the controller will be damaged.

•• The UTP wire is connected hand in hand to make the cable, when two or more controller connected.

•• The power supply should be off when connecting the electric wires, and it can be turned on till making sure the wires are connected correctly and the indicator of main power in red is lighting.

•• Controller should work under the environment of adequately ventilated, dry, not corroded, no flammable gas and rust.

  • Link the light strips/other lights with the 36 channels of the decoder with screws, then you can control the light by the DMX512 console or DMX512 PC console.
  • It can easily to control and change the color/modes in a short time. So you can use it in some large project. Such as club, hotel lighting system, church, party, stage performance and so on.
DMX512-36CH
100 Items

7 other products in the same category:

This website uses cookies to ensure you get the best experience on our website