DC20V-30W SINGLE OUTPUT LED POWER SUPPLY IP64

       PRODUCT SPECIFICATIONS:

         MEAN WELL DC20V-30W SINGLE OUTPUT LED POWER SUPPLY IP64

• Model No.: PLN-30-20

         OUTPUT:

• DC Voltage: 20V
• Constant Current Region Note.6: 14 ~ 20V
• Rated Current: 1.5A
• Current Range: 0 ~ 1.5A
• Rated Power: 30Watts
• Ripple and Noise (max.) Note.2: 2.6Vp-p
• Voltage ADJ. Range Note.5: -5% ~ 10%. Can be adjusted by internal potentiometer SVR1
• Current ADJ. Range Note.5: 3% ~ -25%. Can be adjusted by internal potentiometer SVR2
• Voltage Tolerance Note.3: ±10%
• Line Regulation: ±3.0%
• Load Regulation: ±5.0%
• Setup Time: 500ms / 230VAC 3000ms / 115VAC at full load

         INPUT:

• Voltage Range Note.4: 90 ~ 295VAC 127 ~ 417VDC
• Frequency Range: 47 ~ 63Hz
• Power Factor (Typ.): PF>0.95/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
• Total Hormonic Distortion: THD< 20% when output loading?75% at 115VAC/230VAC input and output loading?80% at 277VAC input
• Efficiency (Typ.): 84%
• AC Current (Typ.): 0.4A/115VAC 0.2A/230VAC 0.15A/277VAC
• Inrush Current (Typ.): COLD START 35A (twidth=25 s measured at 50% Ipeak) at 230VAC
• MAX. No. of PSUs on 16A Circuit Breaker: 64 units (circuit breaker of type B) / 64 units (circuit breaker of type C) at 230VAC
• Leakage Current: <0.5mA / 240VAC

         PROTECTION:

• Over Current: 100 ~ 110%
•                       Protection type: Constant current limiting, recovers automatically after fault condition is removed
• Short Circuit: Hiccup mode recovers automatically after fault condition is removed.
• Over Voltage: 23 ~ 26V
•                      Protection type: Shut down o/p voltage, re-power on to recover
• Over Temperature: Shut down o/p voltage, re-power on to recover

         ENVIRONMENT:

• Working Temp.: -30 ~ +50? (Refer to "Derating Curve")
• Working Humidity: 20 ~ 95% RH non-condensing
• Storage Temp., Humidity: -40 ~ +80?, 10 ~ 95% RH
• Temp. Coefficient: ±0.06%/? (0 ~ 50?)
• Vibration: 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

         SAFETY & EMC:

• Safety Standards: UL879, UL1310, CSA C22.2 No. 207-M89(except for 48V), TUV BS EN/EN61347-1, BS EN/EN61347-2-13, EAC TP TC 004, IP64 approved
• Withstand Voltage: I/P-O/P:3.75KVAC
• Isolation Resistance: I/P-O/P:100M Ohms / 500VDC / 25?/ 70% RH
• EMC Emission: Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (pin?25W), Class D (>70% load); BS EN/EN61000-3-3; EAC TP TC 020
• EMC Immunity: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, BS EN/EN61547, light industry level, criteria B; EAC TP TC 020

         OTHERS: 

• MTBF: 4296.9K hrs. min. Telcordia SR-332 (Bell core); 621.4Khrs min. MIL-HDBK-217F (25?)
• Dimensions: 145*47*30mm (L*W*H)

          FEATURES:

• Universal AC input/Full Range (up to 295VAC)
• Protections: Short Circuit / Over Current / Over Voltage / Over Temperature
• Cooling by Free Air Convection
• Built-in Constant Current Limiting Circuit with Adjustable OCP Level
• Fully Isolated Plastic Case with IP64 Level
• Built-in Active PFC Function
• Pass LPS
• Class II Power Unit, No FG
• Class 2 Power Unit
• 100% Full Load Burn-in Test
• High Reliability
• Suitable for LED Lighting and Moving Sign Applications
• Compliance to Worldwide Safety Regulations for Lighting